Industrial engineering technologists and technicians: AI exposure and career outlook
Industrial engineering technologists and technicians (SOC 17-3026) sit at the 36th percentile for measured AI exposure among the 342 occupations tracked here, measured from a composite of Microsoft Research and Anthropic Economic Index telemetry. An estimated 18% of tasks are already automated and 40% are being reshaped rather than replaced — both modelled figures, not direct measurements. Of the Claude usage observed in this occupation, 41% follows an automation pattern and 59% an augmentation pattern, which places it in the Orchestrator opportunity group: AI reaches deep into this work and amplifies it. The leverage goes to whoever directs it, and that can be you. In Canada the role maps to NOC 22302 (Industrial engineering and manufacturing technologists and technicians), and ESDC's COPS 2024–2033 outlook for that unit group is balance.
Figures last updated 2026-06. Every number on this page is labelled measured or modelled; where a source has no coverage for this occupation, it says so rather than showing a zero.
Key facts
- SOC code
- 17-3026
- Canada NOC 2021
- 22302
- TEER level
- 2 — College / Apprenticeship 2+ yrs
- COPS outlook
- Balance
What the measurements actually say
Three independent studies measure AI exposure for this occupation directly. The two percentages below them are ours, modelled from those measurements.
| Metric | Value | Provenance |
|---|---|---|
| AI applicability | 17% | Measured — Microsoft Research, from 200,000 Copilot conversations classified against O*NET work activities. |
| Observed AI usage | 0% | Measured — Anthropic Economic Index, share of tasks observed being performed with Claude (CC-BY 4.0). |
| Academic AI exposure | 64th percentile | Measured — Felten-Raj-Seamans AIOE index across 774 occupations; the index underlying Statistics Canada's Canadian estimates. |
| Automation-pattern usage | 41% | Measured — the share of observed Claude usage in this occupation where the task is handed over rather than iterated on (Anthropic Economic Index). |
| Augmentation-pattern usage | 59% | Measured — the complement of the row above; the two sum to 100% by construction. This is the pattern where the person stays in the loop. |
| Estimated task automation (modelled) | 18% | Modelled from this occupation's measured telemetry composite, mapped through anchors calibrated to Anthropic's published aggregate findings. Our estimate, not per-occupation telemetry. |
| Estimated task reshaping (modelled) | 40% | Share of tasks where AI acts as co-pilot rather than replacement. Modelled from the measured telemetry composite, calibrated to BCG's published aggregate reshaping rates. Our estimate. |
AI is transforming how this work is done. Professionals who adapt their workflows will thrive; those who don't face increasing competition.
In Canada: NOC 22302
Industrial engineering technologists and technicians map to NOC 22302 — Industrial engineering and manufacturing technologists and technicians at TEER 2 (College / Apprenticeship 2+ yrs). ESDC's COPS 2024–2033 projection for this unit group is Balance.
Mapped via Statistics Canada's official SOC 2018 → NOC 2016 → NOC 2021 correspondence tables. TEER is the second digit of the official NOC code, so it cannot disagree with it.
What this job actually involves
These are the O*NET task statements for Industrial engineering technologists and technicians— the work itself, as reported by people doing the job — grouped by the work activity each task belongs to. Showing 12 of 55, core tasks first.
The exposure figures above are for the occupation as a whole. We do not have a per-task measurement: no published dataset tells us which of these specific tasks AI is doing. Read this as what the job is made of, not as a ranking of what is at risk.
Microsoft's applicability score was itself produced by classifying Copilot conversations against the O*NET work-activity catalogue — the same catalogue these groups come from. The published file gives one number per occupation, not one per activity, so we can tell you that 17% of this occupation's work activities are covered by observed AI usage, but not which ones.
Monitoring Processes, Materials, or Surroundings · 3 tasks
Adhere to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
Core task · Importance 4.2/5 (O*NET)
Monitor equipment during operation to ensure adherence to specifications for characteristics such as pressure, temperature, or flow.
Core task · Importance 4.0/5 (O*NET)
Monitor hazardous waste cleanup procedures to ensure proper application of nanocomposites or accomplishment of objectives.
Core task · Importance 4.0/5 (O*NET)
Estimating the Quantifiable Characteristics of Products, Events, or Information · 2 tasks
Produce images or measurements, using tools or techniques such as atomic force microscopy, scanning electron microscopy, optical microscopy, particle size analysis, or zeta potential analysis.
Core task · Importance 4.4/5 (O*NET)
Assist nanoscientists or engineers in processing or characterizing materials according to physical or chemical properties.
Core task · Importance 4.1/5 (O*NET)
Getting Information · 1 task
Collaborate with scientists or engineers to design or conduct experiments for the development of nanotechnology materials, components, devices, or systems.
Core task · Importance 4.1/5 (O*NET)
Performing General Physical Activities · 1 task
Maintain work area according to cleanroom or other processing standards.
Core task · Importance 4.2/5 (O*NET)
Handling and Moving Objects · 1 task
Calibrate nanotechnology equipment, such as weighing, testing, or production equipment.
Core task · Importance 4.3/5 (O*NET)
Controlling Machines and Processes · 1 task
Operate nanotechnology compounding, testing, processing, or production equipment in accordance with appropriate standard operating procedures, good manufacturing practices, hazardous material restrictions, or health and safety requirements.
Core task · Importance 4.0/5 (O*NET)
Repairing and Maintaining Electronic Equipment · 1 task
Repair nanotechnology processing or testing equipment or submit work orders for equipment repair.
Core task · Importance 4.1/5 (O*NET)
Documenting/Recording Information · 1 task
Maintain accurate record or batch-record documentation of nanoproduction.
Core task · Importance 4.4/5 (O*NET)
Guiding, Directing, and Motivating Subordinates · 1 task
Oversee or inspect production processes.
Core task · Importance 4.0/5 (O*NET)
Task statements and work activities from the O*NET Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under CC BY 4.0. O*NET® is a trademark of USDOL/ETA. USDOL/ETA has not reviewed or approved this material.
That's the average. Is this you?
Everything above describes Industrial engineering technologists and technicians as a whole. Three questions, and nothing is stored or sent.
Where are you in your career?
What does your week mostly look like?
Is your employer deploying AI?
Where the leverage is
Upskill in AI-driven automation (e.g., Make, Zapier) and generative tools in your domain. The opportunity is to pivot from execution to directing AI-augmented workflows.
AI is transforming tasks rather than replacing entire jobs. Routine scheduling and communication automate, but human decision-making remains critical.
Master workflow automation platforms (e.g., Make, Zapier, CRM integrations) to double your output and position for fractional leadership roles.
This guidance is written per exposure band — three texts across all 342 occupations, framed on the ILO's transformation-versus-displacement distinction. It is editorial guidance for the reshaping band, not an occupation-specific research finding about industrial engineering technologists and technicians.
Sources for this occupation
Only the sources that hold data for industrial engineering technologists and technicians are listed. A study that does not cover this occupation is not cited here.
- Microsoft Research — Working with AI (Tomlinson et al., arXiv:2507.07935): Measured AI applicability, from 200,000 anonymised Copilot conversations classified against O*NET work activities.
- Anthropic Economic Index: Measured observed AI usage per occupation, from Anthropic's open per-SOC dataset (CC-BY 4.0).
- Felten, Raj & Seamans — AI Occupational Exposure index: Measured academic exposure percentile; the index underlying Statistics Canada's Canadian AI-exposure estimates (Mehdi & Morissette, 2024).
- O*NET Database 31.0 (USDOL/ETA), CC BY 4.0: The occupation's task statements and work activities, verbatim. Joined on SOC 2018 with no crosswalk — O*NET-SOC is built on SOC — and carrying no claim about which tasks AI touches.
- Anthropic Economic Index — collaboration split (release 2026-06-26, CC-BY 4.0): Measured share of observed Claude usage following an automation rather than an augmentation pattern. This is the second axis of the grouping above.
- Statistics Canada NOC 2021 concordance: Official SOC 2018 → NOC 2016 V1.3 → NOC 2021 V1.0 correspondence tables. TEER is the second digit of the resolved code, so we report it only where the concordance gave a single candidate.
- ESDC COPS 2024–2033: Projected labour-market assessment per NOC 2021 unit group, from the Canadian Occupational Projection System open dataset.
- BCG — AI Will Reshape More Jobs Than It Replaces (April 3, 2026): Published aggregate reshaping rates, used to calibrate our modelled percentages. The per-occupation figures here are our estimates, not BCG's data.
Related occupations
Other roles in Technology.
This is the picture for the role. What about your skills?
These numbers describe an occupation, not a person. Map your own skills against them, see which pathways stay open, and plan the transition you actually want.